BEARING INDUSTRIA CUSCINETTI S.P.A.

Power transmission seals,V-ring seals, globally valid

V-Rings are a low cost sealing option. V-Rings are made are manufactured completely out of rubber and designed to seal on a shaft against a bearing, housing or often behind another shaft seal. Nitrile V-Rings are most common, however they are also available in fluoroelastomer for higher heat applications V-Rings protect equipment components from contamination while retaining grease. Improper, inadequate or contaminated lubrication is the most common failure mode for all types of bearings and V-Rings offer an economical way to protect the more expensive components on industrial equipment. V-Rings typically do well in dry, low torque applications.

A V-Ring is comprised of a lip, a hinge and a body. The body rotates with the shaft while the lip forms a seal. V-Rings have more misalignment capabilities and are easier to install than standard grease seals, however they are not designed for oil or high speed applications.

 

skf 525 VE R Power transmission seals,V-ring seals, globally valid
2000 rpm
166000 N
skf 930 VRME R Power transmission seals,V-ring seals, globally valid
32500 N
40.000 mm
skf 850 VA V Power transmission seals,V-ring seals, globally valid
7000 rpm
One Shield & Snap-Ri
skf 500 VE R Power transmission seals,V-ring seals, globally valid
183 kN
1200 r/min
skf 18 VA V Power transmission seals,V-ring seals, globally valid
26000 rpm
3550 N
skf 200 VL R Power transmission seals,V-ring seals, globally valid
e7
0.5 m/s
skf 199 VS V Power transmission seals,V-ring seals, globally valid
5600 rpm
4300 rpm
skf 8 VS R Power transmission seals,V-ring seals, globally valid
242000 N
2000 rpm
Next page ▸
All Products Contact Now
Product Categories
Deep groove ball bearings
Double row spherical roller bearings
Plain bearings,Bushings
Power transmission seals,V-ring seals for North American market
Power transmission seals,V-ring seals, globally valid
Radial shaft seals for general industrial applications
Radial shaft seals for heavy industrial applications
Radial spherical plain bearings
SAF and SAW pillow blocks with bearings on an adapter sleeve
SAF and SAW pillow blocks with bearings with a cylindrical bore
Self-aligning ball bearings
Single row angular contact ball bearings
Single row cylindrical roller bearings
Single row cylindrical roller bearings without an inner ring
Single row deep groove ball bearings
Single direction thrust ball bearings
Timken 6461a Bearing
Timken Lm503349 Bearing
Jl69310 Timken Bearing
Timken 1729 Bearing