BEARING INDUSTRIA CUSCINETTI S.P.A.

Power transmission seals,V-ring seals, globally valid

V-Rings are a low cost sealing option. V-Rings are made are manufactured completely out of rubber and designed to seal on a shaft against a bearing, housing or often behind another shaft seal. Nitrile V-Rings are most common, however they are also available in fluoroelastomer for higher heat applications V-Rings protect equipment components from contamination while retaining grease. Improper, inadequate or contaminated lubrication is the most common failure mode for all types of bearings and V-Rings offer an economical way to protect the more expensive components on industrial equipment. V-Rings typically do well in dry, low torque applications.

A V-Ring is comprised of a lip, a hinge and a body. The body rotates with the shaft while the lip forms a seal. V-Rings have more misalignment capabilities and are easier to install than standard grease seals, however they are not designed for oil or high speed applications.

 

skf 2000 VE R Power transmission seals,V-ring seals, globally valid
5300 rpm
1.50 mm
skf 38 VS V Power transmission seals,V-ring seals, globally valid
12000 rpm
0.60 mm
skf 199 VS R Power transmission seals,V-ring seals, globally valid
4300 rpm
0.60 mm
skf 28 VA R Power transmission seals,V-ring seals, globally valid
240.0000 mm
0 rpm
skf 445 VRME R Power transmission seals,V-ring seals, globally valid
182000 N
2400 rpm
skf 28 VA V Power transmission seals,V-ring seals, globally valid
1700 rpm
305000 N
skf 900 VA R Power transmission seals,V-ring seals, globally valid
81.6 mm
17000 r/min
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
Deep groove ball bearings
Double row spherical roller bearings
Plain bearings,Bushings
Power transmission seals,V-ring seals for North American market
Power transmission seals,V-ring seals, globally valid
Radial shaft seals for general industrial applications
Radial shaft seals for heavy industrial applications
Radial spherical plain bearings
SAF and SAW pillow blocks with bearings on an adapter sleeve
SAF and SAW pillow blocks with bearings with a cylindrical bore
Self-aligning ball bearings
Single row angular contact ball bearings
Single row cylindrical roller bearings
Single row cylindrical roller bearings without an inner ring
Single row deep groove ball bearings
Single direction thrust ball bearings
Timken 6461a Bearing
Timken Lm503349 Bearing
Jl69310 Timken Bearing
Timken 1729 Bearing