BEARING INDUSTRIA CUSCINETTI S.P.A.

Radial shaft seals for general industrial applications

Radial shaft seals sit between rotating and stationary components, or two components in relative motion. They have two main parts. One is a cylindrical outer covering with an interference fit that seals statically against the housing bore. The second, a sealing lip, seals dynamically and statically against the shaft. Its sealing edge presses against the counterface surface of the shaft with a defined radial load.

DIFFERENTIATION CRITERIA
Sealing lip materials have high chemical/thermal resistance,Superior pump rate,Special coating compensates for housing bore surface imperfections
Robust design,Compliant with national and international standards,TYPICAL APPLICATIONS,Gearboxes,Hydraulic pumps,Axles,Power steering columns,Speed reducers,Transmissions

skf 23035 Radial shaft seals for general industrial applications: Brand : FAG; Designation SNR : R150.22

skf 60X90X8 HMS5 RG Radial shaft seals for general industrial applications: Shaft Size (ds) - 4 : 3.9978; Bearing Length Tolerance (B tol.) - +.010 / -0.010 : +.010 / 0.010

skf 12383 Radial shaft seals for general industrial applications: da min. : 368 mm; Calculation factor (e) : 0,36

skf 108X130X13 CRSH1 R Radial shaft seals for general industrial applications: d : 85,000 mm; Brand : SNR

skf 12382 Radial shaft seals for general industrial applications: Weight : 15,7 Kg; D : 260 mm

skf 12384 Radial shaft seals for general industrial applications: Bore Size d : 85 mm; Radius Rs min : 3.000 mm

skf 11052 Radial shaft seals for general industrial applications: Cr - Dynamic Load Rating : 23155 lbf; Cor - Static Load Rating : 25853 lbf

skf 62X90X12 HMS5 RG Radial shaft seals for general industrial applications: (Grease) Lubrication Speed : 2200 r/min; C : 55 mm

skf 9892 Radial shaft seals for general industrial applications: Outer Diameter (mm) : 12; d : 4 mm

skf 110X170X15 HMSA10 RG Radial shaft seals for general industrial applications: Basic static load rating (C0) : 3900 kN; D : 440 mm

skf 11050 Radial shaft seals for general industrial applications: nG : 770 1/min / Limiting; Bearing number : 230/560-B-K-MB + H30

skf 9894 Radial shaft seals for general industrial applications: Angle : 7 °; d2 : 102 mm