BEARING INDUSTRIA CUSCINETTI S.P.A.

Radial shaft seals for general industrial applications

Radial shaft seals sit between rotating and stationary components, or two components in relative motion. They have two main parts. One is a cylindrical outer covering with an interference fit that seals statically against the housing bore. The second, a sealing lip, seals dynamically and statically against the shaft. Its sealing edge presses against the counterface surface of the shaft with a defined radial load.

DIFFERENTIATION CRITERIA
Sealing lip materials have high chemical/thermal resistance,Superior pump rate,Special coating compensates for housing bore surface imperfections
Robust design,Compliant with national and international standards,TYPICAL APPLICATIONS,Gearboxes,Hydraulic pumps,Axles,Power steering columns,Speed reducers,Transmissions

skf 13663 Radial shaft seals for general industrial applications: Basic dynamic load rating (C90) : 25,1; Factor (K) : 1,6

skf 60X100X10 HMS5 V Radial shaft seals for general industrial applications: Weight : 44,5 Kg; (Grease) Lubrication Speed : 700 r/min

skf 14994 Radial shaft seals for general industrial applications: B : 37 mm; C : 37 mm

skf 13662 Radial shaft seals for general industrial applications: Bearing number : T16050; Bore Diameter (mm) : 406,4

skf 12334 Radial shaft seals for general industrial applications: D : 47 mm; W : 1,85 mm

skf 12333 Radial shaft seals for general industrial applications: Bore Diameter (mm) : 140; Bearing number : 23228 KCW33

skf 48X90X10 HMS5 V Radial shaft seals for general industrial applications: r1 min. : 0,6 mm; Fw : 27,5 mm

skf 12339 Radial shaft seals for general industrial applications: Brand : ILJIN; Bore Diameter (mm) : 34

skf 18X32X7 HMSA10 V Radial shaft seals for general industrial applications: Brand : CRAFT; Outer Diameter (mm) : 160

skf 40X52X6 HMSA10 V Radial shaft seals for general industrial applications: Bearing number : N1014RXHTP; B : 20 mm

skf 26975 Radial shaft seals for general industrial applications: Width (mm) : 56; D : 340 mm

skf 25641 Radial shaft seals for general industrial applications: Bore Diameter (mm) : 28; db min. : 14 mm