Radial spherical plain bearings
Radial spherical plain bearings have an inner ring with a sphered convex outside diameter and an outer ring with a correspondingly sphered but concave inside surface. Their design makes them particularly suitable for bearing arrangements where alignment movements between shaft and housing have to be accommodated, or where oscillating or recurrent tilting or slewing movements must be possible at relatively slow sliding speeds, often accompanied with heavy loadsThese advanced products are used in pivoting, high load bearing applications where angular misalignment is required. Most typically, RBC spherical plain bearings are employed in hydraulic cylinder rod ends, vehicle steering linkage suspensions, heavy equipment articulated joints, and other severe duty uses.To access critical dimensions and data for your design questions, use the Search By Criteria section below. If you are uncertain as to which of RBC's Spherical Plain Bearings is best suited for your design application, check with our selection guide. To view an entire product series, select a product from the table of contents.
- 35 mm x 62 mm x 35 mm skf GEH 35 TXG3E-2LS Radial spherical plain bearings
- 0.64
- Angular Contact Ball
- 300 mm x 430 mm x 165 mm skf GE 300 ES-2LS Radial spherical plain bearings
- 0846802011604
- B04264
- 82.55 mm x 130.175 mm x 72.238 mm skf GEZ 304 ES-2RS Radial spherical plain bearings
- Set Screw
- 8483.20.40.40
- 35 mm x 55 mm x 35 mm skf GEM 35 ES-2RS Radial spherical plain bearings
- N/A
- 0782475838271
- 63.5 mm x 100.013 mm x 95.25 mm skf GEZM 208 ESX-2LS Radial spherical plain bearings
- Double Row | Extreme
- 2.559 Inch | 65 Mill
- 90 mm x 130 mm x 60 mm skf GE 90 ES-2LS Radial spherical plain bearings
- 0.178
- Mounted Units &
- 17 mm x 30 mm x 14 mm skf GE 17 C Radial spherical plain bearings
- 0.0
- Single Row Ball Bear