Single row angular contact ball bearings
Single row angular contact ball bearings have single raceway grooves in the inner and outer rings that are relatively offset. These bearings can support axial loads in one direction only.
The raceways of both the inner and outer rings of this bearing type are made with a set contact angle.Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.
Larger contact angle type has better axial load capability.Small contact angle type has higher permissible speed capability.This bearing type is generally used in adjacent positions
Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions..
- 55 mm x 100 mm x 21 mm skf 7211 BEGAP Single row angular contact ball bearings
- 0.875 Inch | 22.225
- Take Up
- 530 mm x 650 mm x 56 mm skf 718/530 AMB Single row angular contact ball bearings
- 8482.10.50.68
- Bearing
- 85 mm x 180 mm x 41 mm skf 7317 BEGAF Single row angular contact ball bearings
- 31171504
- 140MM Bore; 210MM Ou
- 440 mm x 650 mm x 94 mm skf 7088 BM Single row angular contact ball bearings
- 1.375 Inch | 34.925
- 3.08
- 65 mm x 140 mm x 33 mm skf 7313 BEGBM Single row angular contact ball bearings
- 8865590046287
- PEER BEARING CO.