Single row angular contact ball bearings
Single row angular contact ball bearings have single raceway grooves in the inner and outer rings that are relatively offset. These bearings can support axial loads in one direction only.
The raceways of both the inner and outer rings of this bearing type are made with a set contact angle.Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.
Larger contact angle type has better axial load capability.Small contact angle type has higher permissible speed capability.This bearing type is generally used in adjacent positions
Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions..
- 105 mm x 225 mm x 49 mm skf 7321 BEGAM Single row angular contact ball bearings
- Bearing
- CONSOLIDATED BEARING
- 35 mm x 80 mm x 21 mm skf 7307 BEP Single row angular contact ball bearings
- 4.082
- QM INDUSTRIES
- 65 mm x 120 mm x 23 mm skf 7213 BEGAP Single row angular contact ball bearings
- 0 Inch | 0 Millimete
- Center Pull Horizont
- 50 mm x 130 mm x 31 mm skf 7410 BCBM Single row angular contact ball bearings
- 7.1 Inch | 181Millim
- N/A