BEARING INDUSTRIA CUSCINETTI S.P.A.

Single row cylindrical roller bearings

Single row cylindrical roller bearings are available in different versions, all separable, so as to facilitate assembly.
Bearings and rollers can accommodate high radial loads and reach high speeds. The rollers and cage can be guided by the inner or outer ring. The ring responsible for guiding the rollers is flanged, whilst the second is not flanged and can be extracted.
Single row cylindrical roller bearings with two flanged rings can accommodate axial loads as well as radial loads. This resistance against axial loads depends on the bearing’s lubrication, operating temperature and heat dispersion.

Single row cylindrical roller bearings are also manufactured with snap ring grooves on the outer rings. This design simplifies the bearing joint as the bearings are located into the housing by means of the snap rings. The snap ring groove and snap rings are in accordance with IS0 464.

70 mm x 180 mm x 42 mm NTN N414 Single row cylindrical roller bearings: compatible bore diameter: : 1-7/16 in; seal type: : Labryinth/V-Rin

65 mm x 160 mm x 37 mm NTN N413 Single row cylindrical roller bearings: series: : 223; closure type: : Open

70 mm x 180 mm x 42 mm NTN N413G1C3 Single row cylindrical roller bearings: compatible bearing type: : Deep Groove Ball; compatible bore diameter: : 25 mm

60 mm x 150 mm x 35 mm NTN N412 Single row cylindrical roller bearings: Reference Speed Rating (r/min): : 2400; D : 115mm

45 mm x 120 mm x 29 mm NTN N409 Single row cylindrical roller bearings: housing material: : Cast Iron; base to bore centerline: : 2.2500 in

40 mm x 110 mm x 27 mm NTN N408 Single row cylindrical roller bearings: r1,2 min. : 0.3 mm; Fatigue load limit Pu : 0.038 kN

35 mm x 100 mm x 25 mm NTN N407 Single row cylindrical roller bearings: maximum pv value: : 50000; maximum v value: : 1200