Single row cylindrical roller bearings
Single row cylindrical roller bearings are available in different versions, all separable, so as to facilitate assembly.
Bearings and rollers can accommodate high radial loads and reach high speeds. The rollers and cage can be guided by the inner or outer ring. The ring responsible for guiding the rollers is flanged, whilst the second is not flanged and can be extracted.
Single row cylindrical roller bearings with two flanged rings can accommodate axial loads as well as radial loads. This resistance against axial loads depends on the bearing’s lubrication, operating temperature and heat dispersion.
Single row cylindrical roller bearings are also manufactured with snap ring grooves on the outer rings. This design simplifies the bearing joint as the bearings are located into the housing by means of the snap rings. The snap ring groove and snap rings are in accordance with IS0 464.
- 120 mm x 260 mm x 55 mm NTN N324C3 Single row cylindrical roller bearings
- 21400 lbf
- 5300 RPM
- 120 mm x 260 mm x 55 mm NTN N324 Single row cylindrical roller bearings
- Standard Felt Seal
- .6250 in
- 110 mm x 240 mm x 50 mm NTN N322C3 Single row cylindrical roller bearings
- Unlubricated
- With Lubrication Fit
- 110 mm x 240 mm x 50 mm NTN N322 Single row cylindrical roller bearings
- 0.7500 in
- AISI 52100 Steel
- 105 mm x 225 mm x 49 mm NTN N321C3 Single row cylindrical roller bearings
- 053893817712
- 29 mm
- 100 mm x 215 mm x 47 mm NTN N320G1C3 Single row cylindrical roller bearings
- 74000 N
- Maximum of +120
- 100 mm x 215 mm x 47 mm NTN N320G1 Single row cylindrical roller bearings
- 100 mm x 215 mm x 47 mm