BEARING INDUSTRIA CUSCINETTI S.P.A.

Single row deep groove ball bearings

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise,Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

10 mm x 26 mm x 8 mm NTN 6000LLU/LP03 Single row deep groove ball bearings: d : 8 mm; Width (mm) : 4

10 mm x 26 mm x 8 mm NTN 6000LLU/LP03QT Single row deep groove ball bearings: Basic static load rating (C0) : 40 kN; Brand : FBJ

10 mm x 26 mm x 8 mm NTN 6000LLU/L260 Single row deep groove ball bearings: Fatigue load limit (Pu) : 4,9; Fw : 22 mm

10 mm x 26 mm x 8 mm NTN 6000LLU/L623 Single row deep groove ball bearings: Bore Diameter (mm) : 220; Size (mm) : 10 mm x 26 mm x 8 mm

10 mm x 26 mm x 8 mm NTN 6000LLU/6K Single row deep groove ball bearings: Bore Diameter (mm) : 17; B1 : 24 mm

10 mm x 26 mm x 8 mm NTN 6000LLU/5K Single row deep groove ball bearings: F : 94 mm; L : 57 mm

10 mm x 26 mm x 8 mm NTN 6000LLU/2AU1 Single row deep groove ball bearings: Cr - Dynamic Load Rating : 167258 lbf; Dimension L : 770 mm

10 mm x 26 mm x 8 mm NTN 6000LLU/3ASQT Single row deep groove ball bearings: Weight : 0,688 Kg; Bore : 1.772 Inch | 45 Mill

10 mm x 26 mm x 8 mm NTN 6000LLU/5C Single row deep groove ball bearings: B2 : 9.101 in; Bearing Number : 23164K

10 mm x 26 mm x 8 mm NTN 6000LLU/2ASU1 Single row deep groove ball bearings: Db max : 104 mm; (Grease) Lubrication Speed : 15 000 r/min

10 mm x 26 mm x 8 mm NTN 6000LLU/15A Single row deep groove ball bearings: C : 12 mm; Da max. : 36 mm

10 mm x 26 mm x 8 mm NTN 6000LLU/2AS Single row deep groove ball bearings: Limiting Speed - Grease : 8,700 rpm; Cone ra (max) : 1 mm