Single row angular contact ball bearings
Single row angular contact ball bearings have single raceway grooves in the inner and outer rings that are relatively offset. These bearings can support axial loads in one direction only.
The raceways of both the inner and outer rings of this bearing type are made with a set contact angle.Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.
Larger contact angle type has better axial load capability.Small contact angle type has higher permissible speed capability.This bearing type is generally used in adjacent positions
Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions..
- 850 mm x 1030 mm x 82 mm skf 718/850 AMB Single row angular contact ball bearings
- Wide Inner Ring
- Spherical
- 55 mm x 120 mm x 29 mm skf 7311 BECBY Single row angular contact ball bearings
- 3440 lbf
- 2.016 Inch | 51.206
- 35 mm x 80 mm x 21 mm skf 7307 BEGAP Single row angular contact ball bearings
- 50MM Bore; 90MM Outs
- Metric
- 80 mm x 140 mm x 26 mm skf 7216 BECBPH Single row angular contact ball bearings
- Bearing
- 4012802619997
- 76.2 mm x 177.8 mm x 39.688 mm skf AMS 24 ABP Single row angular contact ball bearings
- M06110
- Mounted Units &