Single row angular contact ball bearings
Single row angular contact ball bearings have single raceway grooves in the inner and outer rings that are relatively offset. These bearings can support axial loads in one direction only.
The raceways of both the inner and outer rings of this bearing type are made with a set contact angle.Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.
Larger contact angle type has better axial load capability.Small contact angle type has higher permissible speed capability.This bearing type is generally used in adjacent positions
Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions..
- 40 mm x 110 mm x 27 mm skf 7408 BM Single row angular contact ball bearings
- N/A
- 4 Bolt Square Flange
- 55 mm x 120 mm x 29 mm skf 7311 BECCM Single row angular contact ball bearings
- N/A
- SCHAEFFLER GROUP
- 360 mm x 650 mm x 95 mm skf 7272 BM Single row angular contact ball bearings
- 150MM Bore; Straight
- Bearing
- 95 mm x 170 mm x 32 mm skf 7219 BECBP Single row angular contact ball bearings
- Pillow Block Bearing
- 4 Bolt Pillow Block
- 60 mm x 110 mm x 22 mm skf 7212 BEP Single row angular contact ball bearings
- 5.0
- BEARINGS LIMITED
- 600 mm x 870 mm x 118 mm skf 70/600 AGMB Single row angular contact ball bearings
- B04311
- Roller Bearings
- 95 mm x 170 mm x 32 mm skf 7219 BECBY Single row angular contact ball bearings
- 12.25 Inch | 311.15
- Shaft Mount