Single row angular contact ball bearings
Single row angular contact ball bearings have single raceway grooves in the inner and outer rings that are relatively offset. These bearings can support axial loads in one direction only.
The raceways of both the inner and outer rings of this bearing type are made with a set contact angle.Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.
Larger contact angle type has better axial load capability.Small contact angle type has higher permissible speed capability.This bearing type is generally used in adjacent positions
Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions..
- 12 mm x 37 mm x 12 mm skf 7301 BEP Single row angular contact ball bearings
- 43000 lb
- 48500 lbs
- 50 mm x 110 mm x 27 mm skf 7310 BEGAY Single row angular contact ball bearings
- 0846802015435
- 0.75 Inch | 19.05 Mi
- 180 mm x 320 mm x 52 mm skf 7236 BCBM Single row angular contact ball bearings
- M06110
- 8865590109166
- 95 mm x 170 mm x 32 mm skf 7219 BEP Single row angular contact ball bearings
- Bushing No Flange
- 4 Inch | 101.6 Milli
- 20 mm x 52 mm x 15 mm skf 7304 BECBPH Single row angular contact ball bearings
- SCHAEFFLER GROUP
- ABEC 1 | ISO P0
- 100 mm x 265 mm x 60 mm skf 7420 CBM Single row angular contact ball bearings
- 5 Inch | 127 Millime
- 0.188 Inch | 4.775 M