BEARING INDUSTRIA CUSCINETTI S.P.A.

Single row cylindrical roller bearings

Single row cylindrical roller bearings are available in different versions, all separable, so as to facilitate assembly.
Bearings and rollers can accommodate high radial loads and reach high speeds. The rollers and cage can be guided by the inner or outer ring. The ring responsible for guiding the rollers is flanged, whilst the second is not flanged and can be extracted.
Single row cylindrical roller bearings with two flanged rings can accommodate axial loads as well as radial loads. This resistance against axial loads depends on the bearing’s lubrication, operating temperature and heat dispersion.

Single row cylindrical roller bearings are also manufactured with snap ring grooves on the outer rings. This design simplifies the bearing joint as the bearings are located into the housing by means of the snap rings. The snap ring groove and snap rings are in accordance with IS0 464.

130 mm x 230 mm x 40 mm NTN N226C3 Single row cylindrical roller bearings: bearing material: : Oil-Impregnated Bron; groove/plug type: : None

130 mm x 230 mm x 40 mm NTN N226 Single row cylindrical roller bearings: locking device: : Double Set Screw; series: : ZT5000

120 mm x 215 mm x 40 mm NTN N224G1 Single row cylindrical roller bearings: series: : RAK; replacement bearing: : G1008KRRB

120 mm x 215 mm x 40 mm NTN N224G1C3 Single row cylindrical roller bearings: series: : 200; inner ring width: : 3.5625 in

110 mm x 170 mm x 28 mm NTN NJ1022 Single row cylindrical roller bearings: B : 6.8750 in; series: : UCNFL200MZ20RFW

80 mm x 125 mm x 22 mm NTN NJ1016 Single row cylindrical roller bearings: lubrication type: : Lubrication Fitting; base width: : 2.1250 in

70 mm x 110 mm x 20 mm NTN NJ1014G1 Single row cylindrical roller bearings: radial dynamic load capacity: : 18000 lb; maximum rpm: : 2400 RPM

60 mm x 95 mm x 18 mm NTN NJ1012G1 Single row cylindrical roller bearings: B : 260 mm; Reference speed : 600 r/min

60 mm x 95 mm x 18 mm NTN NJ1012 Single row cylindrical roller bearings: bore type: : Round; cage material: : Brass

50 mm x 80 mm x 16 mm NTN NJ1010G1 Single row cylindrical roller bearings: Static Load Rating (kN): : 62; Clearance: : Standard

45 mm x 75 mm x 16 mm NTN NJ1009G1 Single row cylindrical roller bearings: taper: : 1:12; overall length: : 3.5430 in

35 mm x 62 mm x 14 mm NTN NJ1007G1 Single row cylindrical roller bearings: Seals or Shields: : Open Type; Grease Limiting Speed (r/min): : 7000