Single row cylindrical roller bearings
Single row cylindrical roller bearings are available in different versions, all separable, so as to facilitate assembly.
Bearings and rollers can accommodate high radial loads and reach high speeds. The rollers and cage can be guided by the inner or outer ring. The ring responsible for guiding the rollers is flanged, whilst the second is not flanged and can be extracted.
Single row cylindrical roller bearings with two flanged rings can accommodate axial loads as well as radial loads. This resistance against axial loads depends on the bearing’s lubrication, operating temperature and heat dispersion.
Single row cylindrical roller bearings are also manufactured with snap ring grooves on the outer rings. This design simplifies the bearing joint as the bearings are located into the housing by means of the snap rings. The snap ring groove and snap rings are in accordance with IS0 464.
- 25 mm x 47 mm x 12 mm NTN NJ1005G1 Single row cylindrical roller bearings
- Contact/Lip
- 9-7/16 in
- 160 mm x 340 mm x 68 mm NTN NH332C4 Single row cylindrical roller bearings
- Powder Coated
- 2000
- 100 mm x 215 mm x 47 mm NTN NH320G1C4 Single row cylindrical roller bearings
- Two Metal Shields
- In Stock
- 45,000 mm x 100,000 mm x 32,000 mm NTN NH309 Single row cylindrical roller bearings
- Roller & Cage As
- 1.0000 in
- 150 mm x 320 mm x 65 mm NTN NF330 Single row cylindrical roller bearings
- Uncoated
- Four-Bolt Round
- 95 mm x 170 mm x 32 mm NTN NH219EGRBC3 Single row cylindrical roller bearings
- 4-5/8 in
- Non-Expansion Bearin
- 70 mm x 150 mm x 35 mm NTN NF314G1C4 Single row cylindrical roller bearings
- 2.2500 in
- 4450 RPM
- 50 mm x 110 mm x 27 mm NTN NF310 Single row cylindrical roller bearings
- 120 mm
- 029176017186
- 40 mm x 90 mm x 23 mm NTN NF308 Single row cylindrical roller bearings
- 1.2500 in
- Carbon Steel
- 30 mm x 72 mm x 19 mm NTN NF306ET2X Single row cylindrical roller bearings
- Non-Expansion Bearin
- 16.7500 in