BEARING INDUSTRIA CUSCINETTI S.P.A.

Single row deep groove ball bearings

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise,Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

90 mm x 140 mm x 16 mm NTN 16018C4 Single row deep groove ball bearings: C : 31 mm; Bore Diameter (mm) : 75

90 mm x 140 mm x 16 mm NTN 16018 Single row deep groove ball bearings: Size (mm) : 90 mm x 140 mm x 16 mm; Brand : CYSD

90 mm x 140 mm x 16 mm NTN 16018C3 Single row deep groove ball bearings: D : 225 mm; C : 49 mm

85 mm x 130 mm x 14 mm NTN 16017 Single row deep groove ball bearings: P/S : S; Outer Diameter (mm) : 22

80 mm x 125 mm x 14 mm NTN 16016C4 Single row deep groove ball bearings: Size (mm) : 80 mm x 125 mm x 14 mm; Bore Diameter (mm) : 100

80 mm x 125 mm x 14 mm NTN 16016C3 Single row deep groove ball bearings: Groove Width : 1 mm; Fillet Radius/Chamfer : 0.3 mm

80 mm x 125 mm x 14 mm NTN 16016 Single row deep groove ball bearings: Basic static load rating (C0) : 25,3 kN; Outer Diameter (mm) : 28

80 mm x 125 mm x 14 mm SNR 16016 Single row deep groove ball bearings: Ab - Cage-Cone Frontface Clearance : 0.08 in; Cone Part Number : HM89443

220 mm x 340 mm x 37 mm NTN 16044C3 Single row deep groove ball bearings: G2 - Heat Generation Factor (Rib-Roller End) : 9.4; e - ISO Factor8 : 0.38

200 mm x 310 mm x 34 mm SNR 16040 Single row deep groove ball bearings: d : 120 mm; Bearing number : 9124PP

240 mm x 360 mm x 37 mm NTN 16048L1C3 Single row deep groove ball bearings: Series : Standard; Dimension M : 0.179 in

200 mm x 310 mm x 34 mm NTN 16040C3 Single row deep groove ball bearings: Basic static load rating (C0) : 3,34 kN; (Grease) Lubrication Speed : 24480 r/min