Single row deep groove ball bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise,Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 190 mm x 290 mm x 31 mm NTN 16038C3 Single row deep groove ball bearings
- 15.512 in
- 626992 lbf
- 170 mm x 260 mm x 28 mm NTN 16034C3 Single row deep groove ball bearings
- 61,214 mm
- 76,2 mm
- 170 mm x 260 mm x 28 mm SNR 16034 Single row deep groove ball bearings
- 0.0026 in
- 3.18 in
- 150 mm x 225 mm x 24 mm NTN 16030C4 Single row deep groove ball bearings
- AST20 48IB60
- +.010 / 0.010
- 130 mm x 200 mm x 22 mm SNR 16026.C3 Single row deep groove ball bearings
- 180
- 130 mm x 200 mm x 22 mm