BEARING INDUSTRIA CUSCINETTI S.P.A.

Single row deep groove ball bearings

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise,Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

75 mm x 115 mm x 13 mm NTN 16015 Single row deep groove ball bearings: B : 80 mm; Outer Diameter (mm) : 397,4

70 mm x 110 mm x 13 mm NTN 16014C3 Single row deep groove ball bearings: Bore Diameter (mm) : 100; Basic static load rating (C0) : 78,40 kN

70 mm x 110 mm x 13 mm NTN 16014/1K Single row deep groove ball bearings: d : 19.05 mm; Outer Diameter (mm) : 47

70 mm x 110 mm x 13 mm NTN 16014 Single row deep groove ball bearings: Width (mm) : 38; Size (mm) : 70 mm x 110 mm x 13 mm

65 mm x 100 mm x 11 mm NTN 16013C3 Single row deep groove ball bearings: Size (mm) : 65 mm x 100 mm x 11 mm; (Oil) Lubrication Speed : 3 000 r/min

65 mm x 100 mm x 11 mm NTN 16013 Single row deep groove ball bearings: B : 13 mm; Outer Diameter (mm) : 55

65 mm x 100 mm x 11 mm SNR 16013.C3 Single row deep groove ball bearings: Shaft Size : 4-15/16 in; Dimension R : 0.75 in

60 mm x 95 mm x 11 mm NTN 16012C3 Single row deep groove ball bearings: d : 1,2 mm; Brand : NSK

60 mm x 95 mm x 11 mm SNR 16012 Single row deep groove ball bearings: d : 40 mm; Outer Diameter (mm) : 78

60 mm x 95 mm x 11 mm NTN 16012 Single row deep groove ball bearings: d : 440 mm; Basic static load rating (C0) : 2712 kN

55 mm x 90 mm x 11 mm NTN 16011C3 Single row deep groove ball bearings: Basic dynamic load rating (C) : 27 kN; Size (mm) : 55 mm x 90 mm x 11 mm

55 mm x 90 mm x 11 mm SNR 16011C3 Single row deep groove ball bearings: r min. : 4 mm; a : 139 mm