Single row cylindrical roller bearings
Single row cylindrical roller bearings are available in different versions, all separable, so as to facilitate assembly.
Bearings and rollers can accommodate high radial loads and reach high speeds. The rollers and cage can be guided by the inner or outer ring. The ring responsible for guiding the rollers is flanged, whilst the second is not flanged and can be extracted.
Single row cylindrical roller bearings with two flanged rings can accommodate axial loads as well as radial loads. This resistance against axial loads depends on the bearing’s lubrication, operating temperature and heat dispersion.
Single row cylindrical roller bearings are also manufactured with snap ring grooves on the outer rings. This design simplifies the bearing joint as the bearings are located into the housing by means of the snap rings. The snap ring groove and snap rings are in accordance with IS0 464.
- 25 mm x 80 mm x 21 mm NTN N405 Single row cylindrical roller bearings
- 6.8750 in
- 4.0000 in
- 170 mm x 360 mm x 72 mm SNR N.334.E.M.J30 Single row cylindrical roller bearings
- Standard Duty
- Non-Expansion Bearin
- 150 mm x 320 mm x 65 mm NTN N330 Single row cylindrical roller bearings
- 12000 fpm
- 5.7260 in
- 130 mm x 280 mm x 58 mm NTN N326C4 Single row cylindrical roller bearings
- Open Type
- Standard
- 130 mm x 280 mm x 58 mm NTN N326 Single row cylindrical roller bearings
- 6.5000 in
- Two-Bolt Base
- 120 mm x 260 mm x 55 mm NTN N324G1C3 Single row cylindrical roller bearings
- 2680 lbf
- 1.7656 in