NSK 6200 Bearing

Single row cylindrical roller bearings

Single row cylindrical roller bearings are available in different versions, all separable, so as to facilitate assembly.
Bearings and rollers can accommodate high radial loads and reach high speeds. The rollers and cage can be guided by the inner or outer ring. The ring responsible for guiding the rollers is flanged, whilst the second is not flanged and can be extracted.
Single row cylindrical roller bearings with two flanged rings can accommodate axial loads as well as radial loads. This resistance against axial loads depends on the bearing’s lubrication, operating temperature and heat dispersion.

Single row cylindrical roller bearings are also manufactured with snap ring grooves on the outer rings. This design simplifies the bearing joint as the bearings are located into the housing by means of the snap rings. The snap ring groove and snap rings are in accordance with IS0 464.

70 mm x 125 mm x 24 mm NTN NF214 Single row cylindrical roller bearings

70 mm x 125 mm x 24 mm NTN NF214 Single row cylindrical roller bearings: cage material: : Nylon; snap ring included: : Without Snap Ring

60 mm x 110 mm x 22 mm NTN NF212 Single row cylindrical roller bearings

60 mm x 110 mm x 22 mm NTN NF212 Single row cylindrical roller bearings: cage material: : Brass; series: : CD13

55 mm x 100 mm x 21 mm NTN NF211EG1 Single row cylindrical roller bearings

55 mm x 100 mm x 21 mm NTN NF211EG1 Single row cylindrical roller bearings: lubrication type: : Lubrication Fitting; B : 1-5/8 in

50 mm x 90 mm x 20 mm NTN NF210EG1 Single row cylindrical roller bearings

50 mm x 90 mm x 20 mm NTN NF210EG1 Single row cylindrical roller bearings: Availability: : In Stock; Oil Limiting Speed (r/min): : 6700

50 mm x 90 mm x 20 mm NTN NF210 Single row cylindrical roller bearings

50 mm x 90 mm x 20 mm NTN NF210 Single row cylindrical roller bearings: D2 ≈ : 63.15 mm; d2 ≈ : 41.194 mm

55 mm x 100 mm x 21 mm NTN NF211 Single row cylindrical roller bearings

55 mm x 100 mm x 21 mm NTN NF211 Single row cylindrical roller bearings: fillet radius: : 1 mm; outer ring width: : 30 mm

45 mm x 85 mm x 19 mm NTN NF209EG1C3 Single row cylindrical roller bearings

45 mm x 85 mm x 19 mm NTN NF209EG1C3 Single row cylindrical roller bearings: ba : 56.356 mm; End plug (suffix Y) : EPR 16

45 mm x 85 mm x 19 mm NTN NF209 Single row cylindrical roller bearings

45 mm x 85 mm x 19 mm NTN NF209 Single row cylindrical roller bearings: sleeve bearing material: : Babbitt; frame base width: : 4 in

40 mm x 80 mm x 18 mm NTN NF208 Single row cylindrical roller bearings

40 mm x 80 mm x 18 mm NTN NF208 Single row cylindrical roller bearings: maximum v value: : 750 fp/min; sleeve bearing type: : Plain Sleeve

30 mm x 62 mm x 16 mm NTN NF206ET2X Single row cylindrical roller bearings

30 mm x 62 mm x 16 mm NTN NF206ET2X Single row cylindrical roller bearings: horizontal bolt spacing: : 50 mm; d : 40 mm

25 mm x 52 mm x 15 mm NTN NF205ET2X Single row cylindrical roller bearings

25 mm x 52 mm x 15 mm NTN NF205ET2X Single row cylindrical roller bearings: d : 25 mm; bearing material: : Stainless Steel

105 mm x 160 mm x 26 mm NTN NF1021C4 Single row cylindrical roller bearings

105 mm x 160 mm x 26 mm NTN NF1021C4 Single row cylindrical roller bearings: Cage Type: : Plastic; Clearance: : Standard