NSK 6200 Bearing

Single row cylindrical roller bearings

Single row cylindrical roller bearings are available in different versions, all separable, so as to facilitate assembly.
Bearings and rollers can accommodate high radial loads and reach high speeds. The rollers and cage can be guided by the inner or outer ring. The ring responsible for guiding the rollers is flanged, whilst the second is not flanged and can be extracted.
Single row cylindrical roller bearings with two flanged rings can accommodate axial loads as well as radial loads. This resistance against axial loads depends on the bearing’s lubrication, operating temperature and heat dispersion.

Single row cylindrical roller bearings are also manufactured with snap ring grooves on the outer rings. This design simplifies the bearing joint as the bearings are located into the housing by means of the snap rings. The snap ring groove and snap rings are in accordance with IS0 464.

45 mm x 85 mm x 19 mm NTN N209C3 Single row cylindrical roller bearings

45 mm x 85 mm x 19 mm NTN N209C3 Single row cylindrical roller bearings: maximum pv value: : Dry 1.65, Periodic L; maximum v value: : Dry 0.50;Period

45 mm x 85 mm x 19 mm NTN N209 Single row cylindrical roller bearings

45 mm x 85 mm x 19 mm NTN N209 Single row cylindrical roller bearings: head width: : 4.4 mm; head diameter: : 21 mm

40 mm x 80 mm x 18 mm NTN N208ET2X Single row cylindrical roller bearings

40 mm x 80 mm x 18 mm NTN N208ET2X Single row cylindrical roller bearings: bore type: : Round; housing material: : Cast Iron

40 mm x 80 mm x 18 mm NTN N208C3 Single row cylindrical roller bearings

40 mm x 80 mm x 18 mm NTN N208C3 Single row cylindrical roller bearings: overall length: : 8.8750 in; expansion type: : Expansion Bearing &#

40 mm x 80 mm x 18 mm SNR N.208.EG15 Single row cylindrical roller bearings

40 mm x 80 mm x 18 mm SNR N.208.EG15 Single row cylindrical roller bearings: finish/coating: : Uncoated; D : 225 mm

40 mm x 80 mm x 18 mm NTN N208 Single row cylindrical roller bearings

40 mm x 80 mm x 18 mm NTN N208 Single row cylindrical roller bearings: internal clearance: : C0; B : 18 mm

35 mm x 72 mm x 17 mm NTN N207ET2XC3 Single row cylindrical roller bearings

35 mm x 72 mm x 17 mm NTN N207ET2XC3 Single row cylindrical roller bearings: finish/coating: : Uncoated; maximum rpm: : 2700 RPM

35 mm x 72 mm x 17 mm NTN N207ET2X Single row cylindrical roller bearings

35 mm x 72 mm x 17 mm NTN N207ET2X Single row cylindrical roller bearings: d : 80 mm; D : 140 mm

35 mm x 72 mm x 17 mm SNR N.207.E.G15 Single row cylindrical roller bearings

35 mm x 72 mm x 17 mm SNR N.207.E.G15 Single row cylindrical roller bearings: bore type: : Round; d : 150 mm

30 mm x 62 mm x 16 mm NTN N206ET2XC3 Single row cylindrical roller bearings

30 mm x 62 mm x 16 mm NTN N206ET2XC3 Single row cylindrical roller bearings: needle bearing type: : Machined Bearing wit; series: : SJ

25 mm x 52 mm x 15 mm NTN N205ET2XC3 Single row cylindrical roller bearings

25 mm x 52 mm x 15 mm NTN N205ET2XC3 Single row cylindrical roller bearings: K : 4.5 mm; Limiting speed : 4800 r/min

30 mm x 62 mm x 16 mm SNR N.206.E.G15 Single row cylindrical roller bearings

30 mm x 62 mm x 16 mm SNR N.206.E.G15 Single row cylindrical roller bearings: Seals or Shields: : Open Type; Dynamic Load Rating (kN): : 52.7