Single row cylindrical roller bearings
Single row cylindrical roller bearings are available in different versions, all separable, so as to facilitate assembly.
Bearings and rollers can accommodate high radial loads and reach high speeds. The rollers and cage can be guided by the inner or outer ring. The ring responsible for guiding the rollers is flanged, whilst the second is not flanged and can be extracted.
Single row cylindrical roller bearings with two flanged rings can accommodate axial loads as well as radial loads. This resistance against axial loads depends on the bearing’s lubrication, operating temperature and heat dispersion.
Single row cylindrical roller bearings are also manufactured with snap ring grooves on the outer rings. This design simplifies the bearing joint as the bearings are located into the housing by means of the snap rings. The snap ring groove and snap rings are in accordance with IS0 464.
- 30 mm x 62 mm x 16 mm NTN N206ET2X Single row cylindrical roller bearings
- 053893075396
- Class 3 (Precis
- 25 mm x 52 mm x 15 mm NTN N205ET2X Single row cylindrical roller bearings
- USRB 5000A
- Spherical Roller
- 25 mm x 52 mm x 15 mm SNR N.205.E.G15 Single row cylindrical roller bearings
- 1.5000 in
- Medium Duty
- 20 mm x 47 mm x 14 mm NTN N204ET2X Single row cylindrical roller bearings
- -65 to +250 &de
- 5.5000 in
- 20 mm x 47 mm x 14 mm SNR N.204.E.G15 Single row cylindrical roller bearings
- Mast Guide Ball Bear
- Ball
- 90 mm x 140 mm x 24 mm NTN N1018C2NAP5 Single row cylindrical roller bearings
- 90 mm x 140 mm x 24 mm
- 90 mm x 140 mm x 24 mm NTN N1018 Single row cylindrical roller bearings
- 053893083315
- -65 to +250 &de
- 80 mm x 125 mm x 22 mm NTN N1016G1C4 Single row cylindrical roller bearings
- 1217kjc3-qbl
- 0.02 KGS
